Unitronic is pleased to introduce its all-new Carbon Fiber Intake System for the 2.5TFSI EA855 EVO engines, found in the 8V.2 Audi RS 3® and 8S Audi TT RS®. Engineered to be coupled with Unitronic’s 3” Turbo Inlet Elbow, this Intake System will give you the competitive advantage, gaining you that extra tenth of a second and a few gained mph while supporting the airflow demands out of any stock turbo, hybrid turbo, and full-frame turbo on the market.

To validate its form through function, Unitronic engineers strategically used CFD to maximize its efficiency. Every aspect of the design was studied carefully, iteration after iteration until reaching the maximums governed by the laws of physics. The CFD simulations illustrate how well airflow travels through the system. The primary focus was to achieve laminar flow and minimal pressure drop in all areas of the design. The result of this is an increase in volumetric efficiency.

The CFD sectional of the front air duct shows how laminar airflow is directed towards the airbox. It is also seen how the side gills operate; they were employed for safety, in the event the front inlets are obstructed; and for scavenging to eliminate vortices as the high-speed air enters the airbox. From the side, laminar flow can be seen as it enters the airbox. As part of the design intent, the use of an integral velocity stack made into the air filter works to promote efficiency.

Unitronic’s pursuit for perfection is applied even in the most minute areas of product design, and in this case, Unitronic identified that allowing for ample tolerance for engine movement on an item that is both affixed to a dynamic engine and a rigid chassis. Rather than using traditional silicone for its hose connections, Unitronic’s Carbon Fiber Intake System uses a high-quality, extremely durable EPDM material for its couplers.

This offers a superior amount of flexibility over traditional silicone, while still providing, with its intelligent design, the rigidity and strength needed to support high-powered 2.5TFSI’s. Taking the design and engineering one step further, Unitronic’s engineers created a design that allows for smooth, laminar airflow on the inside walls, while maintaining flexibility through the means of a non-collapsing structural rib profile. Unitronic's couplers are designed to perfectly align with the bead rolls on the carbon fiber tubes, to ensure a perfect and seamless connection; hose clamp guides ensure perfect alignment.

The sectional of the coupler shows a 3D CFD representation of airflow across the ribbed profiled construction. The ID of the ribs matches the ID of the interconnecting tubes for a seamless transition. As a result, even under varying conditions where flexing and stretching happen, airflow remains uninterrupted.

For ultra strength, a metal insert was impregnated into the 3" and 4" carbon fiber tube ends to ensure the tube remains rigid for life after properly tightening the hose clamp.

Using its in-house Superflow SF-1020 Flow Bench, Unitronic Engineers further validated designs to ensure that the Unitronic Carbon Fiber Intake System effectively optimizes airflow in a variety of conditions. The OEM intake yielded a peak flow rate of 595 CFM at 28” of H2O (Aq), while the Unitronic Carbon Fiber 4” Intake System achieved 1118 CFM with the RaceFilter for a gain of 88% over the OEM Intake and flowed 1095 CFM with the Sport Filter, a gain of 84% over the OEM Intake.

Filter Notes:

The sport filter(red) is included with every system. The race filter(blue) is an add-on item.