Product Details
Description
272mm Rear Rotor Pair
StopTech® recognizes that great brakes need to look as good as they perform. Performance wheels and tires are best complemented with StopTech®
StopTech® Drilled+Slotted, brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
E-Coated Finish
Most StopTech® Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these areas can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
Nearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
Product Features
- Slotted & Drilled brake rotors prevent glazing of the pads, add bite and improve wet and dry braking performance.
- The addition of high performance street pads provide you with higher resistance to fade, higher maximum operating temperature, and better initial bite to allow consistent deep braking into corners.
- Superior resistance to cracking due to thermal stress
- Increased molybdenum content that extends reliability, service life and helps reduce NVH "noise" issues
Kit Contains
| Qty | Part | Brand |
| 1 | StopTech Brake Rotor (Left) - 127.33131L |
|
| 1 | StopTech Brake Rotor (Right) - 127.33131R |
|
warranty
90 Day or 3,000 Mile Warranty
Customer Pictures
Customer Reviews
-
My front factory brakes where done at 33k miles. I decided to do both front rear at the same time but figured to go with something better than stock. What I hated most about the front brakes is the fade at higher speeds and they rusted on the hub part. These rotors are black so that eliminates that issue plus it looks nice with black wheels. The difference is night and day! Using ebc red stuff pads these things stop on a dime and give 9 cents change regardless of what speed your doing! Worth every single penny! This is on a 2015 A3 Quattro 2.0T. Even driving around town it it makes a difference. Very little amount of pedal is all it takes. Even when the factory brakes where good they didn’t even come close to this setup!
