Low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine, and provides optimum protection against wear. The results are savings in fuel and extended service life for the engine.

The chemical agents smooth the metal surfaces inside the engine, evening out microscopically small bumps. This reduces friction in the engine and therefore fuel consumption, too. They also provide protection from wear and tear. In fact, compared to conventional motor oil of the same quality, they reduce wear and tear by up to 30 percent.

This especially pays off in vehicles with an auto start/stop function driving in urban traffic: every time the engine switches off, lubrication is interrupted. And every time the engine goes back on again, there is a risk of increased wear and tear. Here, Molygen motor oils provide extra protection for the engine, thereby increasing durability.

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• ACEA A3
• ACEA B4
• API SN
• BMW Longlife-01 (bis MJ 2018)
• MB 229.5
• Porsche A40
• VW 502 00
• VW 505 00

Technical data

SAE class (engine oils):  5W-40 - SAE J 300
Density at 15 °C:  0,850 g/cm³ DIN 51757
Viscosity at 40 °C:  80,7 mm²/s ASTM D 7042-04
Viscosity at 100 °C:  14,0 mm²/s ASTM D 7042-04
Viscosity at -35 °C:  (MRV) < 60000 mPas ASTM D 4684
Viscosity at -30°C:  (CCS) <= 6600 mPas ASTM D 5293
Viscosity index:  180 DIN ISO 2909
HTHS at 150°C:  >= 3,5 mPas ASTM D 5481
Pour point:  -45 °C DIN ISO 3016