BC Racing’s ZR series for the BMW E90/E92 M3 w/EDC is an adjustable coil overs that improves handling and appearance. Whether you go for a track or street suspension height setting, you will still experience superior performance in driving.

The BC Racing ZR Series Coilovers offer the most adjustability of any BC Racing Coilover System to date. Each ZR Series Coilover System is track tested and developed specifically for racers looking for more damping adjustability than the ER or HM Series can provide.

The ZR Series offers 15-clicks of low-speed compression adjustment, 12-clicks of high speed compression adjustment, and 30-clicks of rebound adjustment. They also offer full height adjustability independent of piston shaft travel and spring compression.

The ZR Series comes standard with an inverted mono-tube damper on cars with McPherson struts. The damper has a steel braided line exiting the top of the damper leading to the external reservoirs that can be remotely mounted on the chassis for easy adjustment. Cars with Double A-Arm suspension come with upright dampers.

*Not all vehicles allow for inverted front and rear dampers. In such cases, an upright mono-tube damper will be supplied. The braided line/hard stem for the external reservoir exits the base of the damper when not inverted. Please note that not all vehicles use camber plates in the front and/or rear. In such cases, pillowball top mounts are supplied in place of camber plates on HM & ZR Series Coilover Systems.

"These images may not represent your application."

Specs:

• 8k Front & 16k Rear Spring Rate
• Inverted Mono-Tube Damper
• Linear Twin Piston Design
• Swift Springs Come Standard On ZR Series Coilover
• Height Adjustment Independent Of Spring Compression
• 30-Clicks Of Compression Adjustment Via The External Reservoirs
• 30-Clicks Of Rebound Adjustment From The Bottom Of The Damper
• 2-inch minimum and 3+ Inches of the total potential drop
• Great for Track, Street, and any other conditions

Please Note:

This kit fits vehicles with Electronic Dampening only.

EDC cancelers are needed; otherwise, EDC fault codes will be present.