The NEUSPEED RSe10 is a lightweight alloy wheel with unmatched quality, perfectly spec-ed for your car. With its design adapted from the European touring challenge cars and weighing 19.75 LBS, the RSe10 will enhance your driving experience cosmetically as well as performance by reducing the rotational mass or unsprung weight.

Specs

• Size: 18x9.0
• Offset (E.T.): +45mm
• PCD (Bolt Pattern): 5-112
• Center Bore: 57.1mm
• Weight: 19.75 lbs

2022+ 8Y RS3 Fitment Notes

• Fits vehicles with steel brakes only.
• Tight clearance -- Installer must confirm barrel to balancing weight clearance.
• Front fenders are much wider than the rears. For square setup, +20mm front spacer is recommended to achieve flush fitment matching the rear.

Recommended Tire Size:

*These sizes are only to be used as a guide*

*For Vehicles that are stock height or slightly lowered.*

*Extremely low vehicles may need a tire width that is smaller*

Wheel Bolts:

Neuspeed Wheels use the OEM wheel bolt size and design. You can reuse your OEM wheel bolts with these wheels! 

• OEM Wheel Bolt Specs:
• Thread Type: 14 X 1.5"
• Thread Length: 28mm Shank
• Seat Type: Ball 
• Head: 17mm Hex

Replacement OEM Wheel bolts: Otis Inc 27mm Ball Seat Wheel Bolts

Notes

• RSe wheels are OEM TPMS (Tire Pressure Monitoring System) compatible.
• Every RSe wheel comes with 'RS' center cap. However, one can choose to utilize OEM Audi or VW center cap as well as mounting lug bolts, which are not included with the wheel.
• Audi cap part #: 4B0 601 170 A
• VW cap part #: 3B7 601 171
• RSe wheels utilize OEM lug bolts with R13 ball seat (Audi & VW specific)