034Motorsport Dynamic+ Stage 2+ ECU Software Upgrade (12-15 A6/A7 3.0T, 13-17 Q5 3.0T, 10-16 S4, 10-17 S5 3.0T, 14-17 SQ5)
Product Details
Description
034Motorsport Performance Software is a must-have for any B8/B8.5 Audi S4/S5 & Q5/SQ5 powered by the 3.0 TFSI Supercharged V6 engine. 034Motorsport 3.0 TFSI tunes are flashed directly through the factory OBD-II port using the 034Motorsport Dynamic+ End User Flashing Kit and offer dramatic increases in horsepower and torque throughout the powerband. The 034Motorsport Dynamic+ End User Flashing Kit allows customers to install their 034Motorsport Dynamic+ Performance Software. In addition, End User Flashing allows Dynamic+ Performance Software customers to receive and install software updates and revisions, flash back to stock, or upgrade to the next stage of performance software for their vehicle.
Performance Gains: +208HP / +173TQ
- Stock: 332 HP / 318 TQ (91 Octane)
- Stage 2+: 540 HP / 491 TQ (E40 Blend)
034Motorsport Stage 2+ Performance Software for the B8/B8.5 Audi S4/S5/Q5/SQ5 3.0 TFSI is engineered to increase horsepower further and torque output over Stage 2 levels with the addition of 034Motorsport's 179 or 190mm Lower Pulley in addition to our upper pulley. The Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine.
Stage 2+ Performance Software features a higher redline of 7,400 RPM, resulting in a broader powerband and greater peak horsepower figures than the factory's 7,000 RPM maximum engine speed. In addition to power improvements, 034Motorsport's engineers spent significant time refining the throttle mapping in both Dynamic and Comfort modes to improve throttle response and allow for more precise modulation. Stage 2+ Performance Software also enables left foot braking, allowing for further vehicle control when driving on the track.
034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 Octane, 93 Octane, 100 Octane, 104, and E40 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER
Required Hardware:
- 034Motorsport Supercharger Pulley Upgrade
- 034Motorsport 3.0 TFSI Crank Pulley Upgrade
- 034Motorsport X34 Carbon Fiber Intake
- 034Motorsport Supercharger Heat Exchanger
- 034Motorsport Performance S-Tronic TCU Software
- 034Motorsport Upgraded HPFP (Required only for E40)
ADVANCED LAUNCH CONTROL
Once again, 034Motorsport has pushed the boundaries of what is possible for the 3.0T Supercharged engines found in many Audi through our Dynamic+ tuning! After extensive development and refinement by our world-class tuning team, all existing and future 034Motorsport tuning customers will have access to all Advanced Launch Control programs.
These features allow you to customize your desired launch RPM via your cruise control stalk and run the intercooler pumps and engine fans at full speed below 10kph to allow for full cooling during staging before drag racing. This provides a large advantage over factory launching protocols as it results in the coolest possible IATs and allows the driver to adjust their launch settings to be optimal for their conditions.
EMISSIONS DISCLAIMER
- This product is sold for racing use as well as use on vehicles not registered for on highway use.
- By purchasing this product, you understand that this product is sold for racing use as well as used on vehicles not registered for on highway use, and that it is not legal for use on highway or street vehicles.
Product Features
- Increased Horsepower & Torque Throughout the Powerband
- Available in 91 Octane, 93 Octane, and 100 Octane Calibrations
- Raised RPM Limit to 7,200 for Broader Powerband
- Track-Tested Calibrations Ensure Consistent Power Delivery
- Improved Power Delivery, Acceleration, and Driving Characteristics
- Refined Throttle Mapping for Enhanced Throttle Response & Precision
- Speed Limiter Removed for Increased Top Speed
- Flashed Directly Via the Factory OBD-II Port
installation
Please Note: Use this product page only if you plan to flash this software to your ECU yourself. To install this software you must have a 034Motorsport Dynamic+ End User Flashing Kit. If you do not have our Dynamic+ End User Flashing Kit and would like to flash from home, click the Icon above and add the Flashing Kit to your cart! (If you do not purchase/own one, you will not be able to flash this software to your ECU and TCU). If you already have a Dynamic+ End User Flashing Kit, simply purchase the software without purchasing the flashing kit.
Requirements for End User Flashing:
- Windows 10 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- CTEK Trickle Charger (Or Similar)
- Available Electrical Outlets
warranty
1 Year Warranty*
Customer Pictures
No images yet