Product Details
Description
The 034Motorsport Dynamic+ Stage 1 Tuning Software for the 8V.5 Audi RS3 and 8S Audi TT-RS equipped with the EA855 2.5TFSI EVO engine is designed to transform the driving experience of your vehicle! Flashed directly through your vehicle’s OBD-II port, 034Motorsport’s proprietary calibrations for the ECU safely and effectively increase the power output of these new aluminum block 5-cylinder engines. The result significantly improves acceleration and throttle response without sacrificing driveability or reliability.
Power is what we seek, but drivability makes it exhilarating for the long term. Many tuners simply crank up the boost and advance the timing, leading to a quick-feeling car but at the sacrifice of drivability and smooth power delivery. This is especially important at the track where being smooth wins races and results in fast, safe, and consistent lap times. 034Motorsport Dynamic+ Software makes more power while increasing drivability through improved throttle resolution, smooth transient response (on/off boost), and safe mapping for the powertrain.
Performance Gains:
Stock: 407 HP / 371 TQ
Stage 1 91: 445 HP / 427 TQ (91 Octane)
Stage 1 E85: 552 HP / 477 TQ (E85)
034Motorsport's 2.5TFSI EVO Dynamic+ Performance Software was developed entirely in-house on 034Motorsport's Development 8V.5 Audi RS3 and 8S TT-RS. The calibrations were refined on multiple enthusiast-owned beta tester cars around North America.
034Motorsport Engineers develop special in-house tools that allow us to access the firmware and maps inside the factory ECU; this level of engineering is required to prevent workarounds and bandaids that many aftermarket companies resort to. 034Motorsport engineers and optimizes the ECU calibrations just like Audi engineers would, but accessing the source of how the ECU controls the engine and making changes at the base level.
This is the ONLY way 034Motorsport can ensure our calibrations meet our high standards for ultimate power with smooth drivability, perfect function, reliability, and added functions and features even beyond what the factory programming can provide.
Required Modifications
Stage 1 E85 - TCU Software
Recommended Modifications
Stage 1 91 Oct - Intake, Intercooler, Midpipes, TCU Software
Stage 1 93 Oct - Intake, Intercooler, Midpipes, TCU Software
Stage 1 E85 - Intake, Intercooler, Midpipes, Ethanol Gauge
NOTE: The E85 calibration is not a flex-fuel style tune. The tune will work with E85 directly from the pump, both summer and winter blends (ethanol content can vary from E60-E85). This tune requires only E85 to be pumped into the fuel tank. Gasoline blends and race fuel mixtures should not be used, and engine damage could occur if the incorrect fuel or octane is used. We strongly recommend an ethanol content gauge be used so that you can monitor the actual ethanol content at the pump you are using. For users running our Stage 2 E85 files, it is required that you run our Bosch 980cc MPI injector kit.
EMISSIONS DISCLAIMER
- This product is sold for racing use only.
- This product is not authorized for use in California on smog controlled vehicles.
- By purchasing this product, you understand this product is sold for competition use on closed roads and is not legal for use in highway or street vehicles.
Product Features
- Increased Horsepower & Torque Throughout the Powerband
- Improved Power Delivery, Acceleration, and Driving Characteristics
- Available in 91 Octane, 93 Octane & E85 Calibrations
- Negated Wastegate Rattle at Light Load & Idle
- Refined Throttle Mapping for Enhanced Throttle Response & Precision
- Raised RPM Limit for Broader Powerband
- Speed Limiter Removed for Increased Top Speed
- Crackle Overrun Enabled in Dynamic Mode
- Flashed Directly Via the Factory OBD-II Port
installation
Please Note: Use this product page only if you plan to flash this software to your ECU yourself. To install this software you must have a 034Motorsport Dynamic+ End User Flashing Kit. If you do not have our Dynamic+ End User Flashing Kit and would like to flash from home, click the Icon above and add the Flashing Kit to your cart! (If you do not purchase/own one, you will not be able to flash this software to your ECU and TCU). If you already have a Dynamic+ End User Flashing Kit, simply purchase the software without purchasing the flashing kit.
REQUIREMENTS FOR END USER FLASHING:
- Windows 7 or Windows 10 Laptop with Available USB Port
- Power Supply for Laptop
- Secure Wired (Or Very Stable WiFi) High-Speed Internet Connection
- Battery Charger, 20AMP minimum (CTEK Brand recommended)
- Available Electrical Outlets
warranty
1 Year Warranty*
Customer Pictures
No images yet